3D Print
About
The workshop is equipped with low- to high-end machines and the latest software that are used as teaching tools and for research support in the fields of design, the arts and architecture. The studio allows for the exploration of the latest digital manufacturing technologies in 3D printing, integrating CAD software, additive manufacturing and computer-controlled fabrication machines.
Ultimaker 2+ Connect & Ultimaker S7
An FDM-based 3D printer
Quantity: 36
Material options: PLA
Max. working envelop: 200 x 200 x 205 mm
Layer thickness: 0.06 mm, 0.1 mm, 0.2 mm
Formlabs Form 2
A stereolithography-based 3D printer
Quantity: 2
Material options: Methacrylate photopolymer resin
Max. working envelop: 125 x 125 x 165 mm
Layer thickness: 0.025 mm
Wasp Clay 40100
A clay extrusion–based printer
Quantity: 1
Material options: Clay
Max. working envelop: ⌀ 400 x 1000 mm
Layer thickness: 0.1 mm, 0.2 mm
Location: Otaniementie 14, Väre G-Floor
Service Hours:
| Monday | Closed/Maintanance | 13:15-17:00 |
| Tuesday-Thursday | 9:15-12:00 | 13:15-20:00 |
| Friday | 9:15-12:00 | 13:15-16:00 |
Hector Reynoso Velasquez
Phone: +358 503 005 887
Email: hector.velasquezreynoso@aalto.fi
Address: Otaniementie 14, Espoo