Building miniature optical antennas using DNA as a guide
. Video: M. Kostiainen and V. Linko
Research groups from University of Jyv盲skyl盲 and Aalto University (Finland) together with researchers from California Institute of Technology (Caltech, USA) and Aarhus University (iNANO Center, Denmark) have reported a new highly parallel technique to fabricate precise metallic nanostructures with designed plasmonic properties by means of different self-assembled DNA origami shapes. The so-called DALI (DNA-assisted lithography) method has been published in the latest issue of Science Advances.
鈥淲e can build virtually any nanoscale shape using a DNA origami technique, and now we have shown how to use these accurate shapes as 鈥渟tencils鈥 to create millions of fully metallic nanostructures with 10 nm feature sizes in one go鈥, explains Adjunct Professor Veikko Linko from Aalto University.
The trick in the DALI method is that when the DNA structures are deposited on a chip coated with silicon, silicon oxide can be selectively grown only on the bare areas of the substrate.
鈥淏y controlling this process, we can create origami-shaped openings on the grown silicon oxide layer, and this layer can be used as a mask for the following lithography steps. Finally, we evaporate metal through these openings and create metallic structures having the same shape and size as the original DNA origami on a transparent substrate, such as sapphire鈥, Boxuan Shen from the Nanoscience Center of University of Jyv盲skyl盲 describes the method.
The tiny metallic features cover the whole transparent substrate, and therefore these surfaces have intriguing optical properties. The small dimensions of the structures 鈥 in the range of ten nanometers 鈥 allow further tuning of these properties at the visible wavelength range.
鈥淎ctually, we have demonstrated here a structure that we believe is the world鈥檚 smallest entirely metallic bowtie-shaped antenna. This extremely small size extends the operating range of optical features from infrared to visible鈥, states Adjunct Professor Jussi Toppari from Molecular Electronics and Plasmonics group at University of Jyv盲skyl盲.
These antennas can find use in dozens of optical and plasmonic applications, such as surface enhanced Raman spectroscopy, biosensing or fluorescence enhancement. Moreover, the researchers demonstrated that the surfaces can be used as polarizers by fabricating chiral structures using DALI.
鈥淭he DALI method is highly parallel, and it could further enable cheap wafer-scale production of surfaces as it does not rely on costly patterning methods. It is also equipped for the future studies to provide bioinspired surfaces and metamaterials if the customized origami structures can be arranged on the substrate before metallization鈥, envisions Professor Mauri Kostiainen from the Biohybrid Materials Group at Aalto University.
Article: 鈥Plasmonic nanostructures through DNA-assisted lithography鈥 Science Advances, volume 4, issue 2, eaap 8978 (February 2, 2018)
More information:
Adjunct Professor Veikko Linko
Biohybrid Materials Group, Aalto University School of Chemical Engineering, Finland
tel. +358 45 673 9997
veikko.linko@aalto.fi
Boxuan Shen
Molecular Electronics and Plasmonics Group, Department of Physics, Nanoscience Center, University of Jyv盲skyl盲, and Biohybrid Materials Group, Aalto University School of Chemical Engineering, Finland
tel. +358 44 299 6182
boxuan.shen@jyu.fi
Professor Mauri Kostiainen
Leader of the Biohybrid Materials Group, Aalto University School of Chemical Engineering, and HYBER Centre of Excellence, Department of Applied Physics, Aalto University School of Science, Finland
tel. +358 50 362 7070
mauri.kostiainen@aalto.fi
Adjunct Professor / Senior Lecturer Jussi Toppari, Leader of the Molecular Electronics and Plasmonics Group, Department of Physics, Nanoscience Center, University of Jyv盲skyl盲, Finland
tel. +358 40 8054123
j.jussi.toppari@jyu.fi
The research has been funded by Academy of Finland, Jane and Aatos Erkko Foundation, the Finnish Cultural Foundation, the Finnish Academy of Science and Letters, the Emil Aaltonen Foundation and the US Office of Naval Research Award.
Read more news

Aalto computer scientists in STOC 2025
Two papers from Aalto Department of Computer Science were accepted to the Symposium on Theory of Computing (STOC).
New Academy Research Fellows and Academy Projects
A total of 44 Aalto researchers received Academy Research Fellowship and Academy Project funding from the Research Council of Finland 鈥 congratulations to all!
Aalto University's Wood Studio's future visions of Finland's most valuable wood are presented at the Finnish Forest Museum Lusto
Curly birch 鈥 the tree pressed by the devil 鈥 exhibition will be on display in Lusto until March 15, 2026.